Table of Contents
Several situations will prompt you to open your garage door manually.
The first is when a power interruption occurs and the second is when your door opener motor is defective and malfunctioning.
If you find yourself in any of these instances, you won’t be able to use your door opener.
Instead, you’ll have to shift to manual mode to open your garage door.
While you can go back to automatic operation when the power comes back, this isn’t true if you have a broken opener.
In this case, you should contact a reliable garage door repair company to revive your garage door operator.
At Sunshine Garage Door Pros, we have a professional team of technicians who can fix your door for you.
We’ve been working with different types of openers so you can trust that we know what we’re doing.
Book with us for same-day garage door repair in Jacksonville.
How To Manually Open A Garage Door From Inside
Knowing how to open your garage door manually is favorable when you’re in a hurry.
If the power comes off or your door opener is acting up, then at least you have a way to access your door.
Let us show you how to manually open a garage door from inside in these 4 steps.
- For your safety, make sure that the door is in a closed position.
That means the bottom of the door should be touching the ground to prevent the latter from unexpectedly crashing down.
- Locate the red emergency release cord and pull it down.
This cable is usually hanging from the garage door opener, so you should easily find it.
When you pull the emergency release cord, this will cause the opener trolley to disconnect from the door opener carriage.
As a result, your garage door is now free from the opener and you can finally operate it manually.
- Now that your door is in manual operation, you can use your hands to raise it towards the overhead tracks.
Make sure that the door is secure up there so that it won’t fall when you drive your car through the doorway.
- Don’t forget to close and lock your garage door after.
Since you’re still in manual mode, you can just pull down on the door until it hits the ground.
How To Manually Open A Garage Door From Outside
You could be outside your garage when a power outage happens or your opener breaks.
Luckily, you can still gain entry to your garage by manually opening the door from outside.
Here’s what you need to do.
- You can access the emergency release cord through a kit called the emergency release kit located outside the door.
The first thing you need to do is determine the location of this kit.
You can find it on the top center part of your door’s exterior.
- Next, the emergency release kit contains a lock that you need to access with the right key in order to release the cable.
Insert and turn the appropriate key inside the lock and then pull the lock tumbler.
You’ll see then that it is connected to the emergency release cord.
- Pull down the red emergency release cable until you hear a click.
That indicates that the opener has disconnected from the door.
- Lift the door with your hands until it doesn’t fall back down anymore.
Finally, you can now safely drive through your garage.
- Lower the garage door down to close it.
How To Put The Door Back In Automatic Operation
To reconnect the garage door opener, pull down the same emergency release cord towards the door.
If you have an automatic trolley, you can simply press the close button on the remote and wait for the opener to re-engage.
Reconnecting the garage door opener only applies if a power interruption is what necessitated you to operate your door manually.
However, if a damaged opener motor is the cause, you shouldn’t continue using the opener to operate your door.
Doing so could cause more trouble and damage.
What you need to do is call our reliable team of technicians at Sunshine Garage Door Pros.
We will determine the cause of the problem and fix it immediately.
Thus, you can go back to the convenient way of automatically operating your door.
Set your schedule with us today for high-quality garage door repair in Jacksonville.
